Feasibility Study of Using a System Based on Image Processing for Guidance of Tractors During Plowing Operations

Document Type : Research Paper

Authors

Department of Biosystems, Faculty of Agriculture, University of Tabriz, Tabriz, Iran

Abstract

Abstract
Nowadays, tractors are almost driven by drivers. A driver does not only has to steer it, but also keep the mounted implements in a given position for some operations, including soil tilling, seed planting, weed controlling, spraying, … . In tillage operation, tractor and attached implements guidance is obtained by fallowing a furrow created by the plow in the soil during the previous passage. Driver has to fallow it to ensure a correct lateral position, but this continuous tiresome work affects his performance. In this research, a tractor driver assistance system was implemented for tillage operation. This system design was based on image processing technique. A test frame was designed and fabricated and a camera and lightening sources were mounted on it. The different positions of the camera on the frame were evaluated to find the best installation place. The experiments were conducted on some different farms. The important factors that affected the system accuracy including soil moisture content, environmental conditions and sunny or cloudy day situations were evaluated. The effects of farm surface conditions, last crop residues, natural or artificial light sources on the system performance were evaluated. LED lightening sources showed the best result, especially when they were used horizontally. Artificial lightening did not show visible differences with natural lightening in dry farming and sandy soils. Remaining cereal stubbles caused the worse system inaccuracy between the studied farms.
 

Keywords


Anthony, S., Cristian, D., Carl, W., Herman, H., and Dvid, S. (2002). A System for Semi-Autonomous Tractor Operations. Auton. Robots 13: 87-10. (In Persian).
Benson, E. R., Reid, J. F., and Zhang, Q. (2003). Machine vision-based guidance system for agricultural grain harvesters using cut-edge detection. Biosystems Engineering, 86(4), 389-398. (In Persian).
Benson, E. R., Stombaugh, T. S., Noguchi, N., Will, J. D., and Reid, J. F. (1998). An evaluation of a geomagnetic direction sensor for vehicle guidance in precision agriculture applications. ASAE paper, 983203. (In Persian).
Bunn, T. L., Slavova, S. and Hall, L. (2008). Narrative text analysis of Kentucky tractor fatality reports. Accident Analysis & Prevention, 40(2), 419-425. (In Persian).
Gan-Mor, S., Upchurch, B. L., Clark, R. L., and Hardage, D. (2002). Implement guidance error as affected by field conditions using automatic DGPS tractor guidance (No. 021153). ASAE Paper. (In Persian).
García-Santillán, I., Guerrero, J. M., Montalvo, M., and Pajares, G. (2018). Curved and straight crop row detection by accumulation of green pixels from images in maize fields. Precision Agriculture, 19(1), 18-41. (In Persian).
Gonzalez-de-Santos, P., Ribeiro, A., Fernandez-Quintanilla, C., Lopez-Granados, F., Brandstoetter, M., Tomic, S., and Perez-Ruiz, M. (2017). Fleets of robots for environmentally-safe pest control in agriculture. Precision Agriculture, 18(4), 574-614
Grovum, M. A., and Zoerb, G. C. (1970). An automatic guidance system for farm tractors. Transactions of the ASAE, 13(5), 565-0573.
Johns, G. (1998). Automatic Guidance of Agricultural field. Machinery. Proceeding of the 5 th International conference Tokyo, Japan. (In Persian).
Kiani, S., Kamgar, S., and Raoufat, M. H. (2012). Machine vision and soil trace-based guidance-assistance system for farm tractors in soil preparation operations. Journal of Agricultural Science, 4(7), 1. (In Persian)
Moncaster, M. E., and Harries, G. O. (1984). Automatic control of tractors and field machines. (In Persian).
Pilarski, T., Happold, M., Pangels, H., Ollis, M., Fitzpatrick, K., and Stentz, A. (2002). The Demeter system for automated harvesting. Autonomous Robots, 13, 9-20. (In Persian).
Radcliffe, J., Cox, J., and Bulanon, D. M. (2018). Machine vision for orchard navigation. Computers in Industry, 98, 165-171.‏ (In Persian).
Richey, C.B. (1959). “Automatic pilot” for farm tractors. Agricultural Engineering, 40(2):78–79, 93. (In Persian).
Rovira-Mas, F., Han, S., Wei, J., and Reid, J. F. (2005). Fuzzy logic model for sensor fusion of machine vision and GPS in autonomous navigation. In 2005 ASAE Annual Meeting (p. 1). American Society of Agricultural and Biological Engineers. (In Persian).
Sissons, R. (1939). Plowing in circles saves time. Prairie Farmer, 111(20), 7.‏
Tillett, N. D. (1991). Automatic guidance sensors for agricultural field machines: a review. Journal of agricultural engineering research, 50, 167-187. (In Persian).
Tillett, N. D. (1993). Robotic manipulators in horticulture: a review. Journal of agricultural engineering research, 55(2), 89-105. (In Persian).
Willrodt, F. L. (1924). U.S. Patent No. 1,506,706. Washington, DC: U.S. Patent and Trademark. (In Persian).
Yun, C., Kim, H.J., Jeon, C.W., and Kim, J.H., (2018). StereoVision-Based Guidance Line Detection Method for Auto-guidance system on Furrow Irrigated Fields. IFAC-PapersOnLine51(17), pp.157-161. (In Persian).