Reviewers

Reviewers Role

Reviewers are pivotal contributors to the advancement of the journal. As part of the peer review process, which follows a double-blind referee system, reviewers are urged not to disclose their identity in any form.

A reviewer should immediately decline to review an article submitted if he/she feels that the article is technically unqualified or if the timely review cannot be done by him/her or if the article has a conflict of interest.

All submissions should be treated as confidential, editorial approval might be given for any outside person’s advice received. No reviewer should pass on the article submitted to him/her for review to another reviewer in his own concern, it should be declined immediately. Reviewers being the base of the whole quality process should ensure that the articles published should be of high quality and original work. He may inform the editor if he finds the article submitted to him for review is under consideration in any other publication to his/her knowledge.

There are no hard and fast rules to analysis an article, this can be done on case-to-case basis considering the worthiness, quality, and originality of the article submitted. 
In general, cases the following may be checked in a review 

  • Structure of the article submitted and its relevance to author guidelines 
  • Purpose and Objective of the article 
  • Method of using transitions in the article 
  • Introduction given and the conclusion/ suggestions provided 
  • References provided to substantiate the content 
  • Grammar, punctuation and spelling
  • Plagiarism issues 
  • Suitability of the article to the need 

A reviewer’s comment decides the acceptance or rejection of an article and they are one major element in a peer review process. All our reviewers are requested to go through the articles submitted to them for review in detail and give the review comments without any bias, which will increase the quality of our journals.

Guidance for Peer Reviewers

All manuscripts are double-blind reviewed. At Journal of Agricultural Mechanization, we believe that peer review is the foundation for safeguarding the quality and integrity of scientific and scholarly research.

As a reviewer you will be advising the editors (Section Editor and Editor-in-Chief), who make the final decision (aided by an editorial committee for all research articles and most analysis articles). We will let you know our decision. Even if we do not accept an article we would like to pass on constructive comments that might help the author to improve it.

All unpublished manuscripts are confidential documents. If we invite you to review an article, please do not discuss it even with a colleague. When you receive an invitation to peer review, you should fill the journal’s reviewing form. You should try to respond to every peer review invitation you receive. If you feel the paper is outside your area of expertise or you are unable to devote the necessary time, please let the editorial office know as soon as possible so that they can invite an alternative reviewer. It as at this stage you may like to nominate an appropriately qualified colleague. Please remember, if an author's manuscript is sitting with reviewers who have not responded to the peer-review request, the author will not get a timely decision.

Please read the journal Aims and Scope and the Author Instruction with care. Considerations should be given to whether the paper is suitable for the journal it is submitted to. The journals' Aims and Scope is available on “Journal Info” menu and pages.

The essential feature of any review is that it is helpful and constructive and we urge reviewers to be robust but polite when making comments to authors. The Peer reviewers should provide an objective critical evaluation of the paper in the broadest terms practicable. Reviewers need to make a recommendation to the Editor-in-Chief on deciding the manuscript. Your report must contain your detailed answers on the journal questions in the reviewing form. If you believe the paper needs revisions to be made before it is acceptable, please make suggestions on how to improve the paper. Likewise, if you feel that a paper is not good enough and has no real prospects of being improved sufficiently to be published you should recommend rejection. 
You should also:

  • Write clearly and so you can be understood by people whose first language is not English
  • Avoid complex or unusual words, especially ones that would even confuse native speakers
  • Number your points and refer to page and line numbers in the manuscript when making specific comments
  • If you have been asked to only comment on specific parts or aspects of the manuscript, you should indicate clearly which these are
  • Treat the author’s work the way you would like your own to be treated

Reviewer Score Sheet is seen by the editors only and the comments will be shared with the authors. You should also indicate if the manuscript requires its Persian or English grammar, punctuation or spelling to be corrected. You can find the journal's article reviewing procedure diagram at the end of this page.

Privacy and Confidentiality 

In Journal of Agricultural Mechanization, manuscripts must be reviewed with due respect for authors’ confidentiality. In submitting their manuscripts for review, authors entrust editors with the results of their scientific work and creative effort, on which their reputation and career may depend. Authors’ rights may be violated by disclosure of the confidential details during review of their manuscript. Reviewers also have rights to confidentiality, which must be respected by the editor. Confidentiality may have to be breached if dishonesty or fraud is alleged but otherwise must be honored. Editors must not disclose information about manuscripts (including their receipt, content, status in the reviewing process, criticism by reviewers, or ultimate fate) to anyone other than the authors and reviewers. This includes requests to use the materials for legal proceedings.

Editors must make clear to their reviewers that manuscripts sent for review are privileged communications and are the private property of the authors. Therefore, reviewers and members of the editorial staff must respect the authors’ rights by not publicly discussing the authors’ work or appropriating their ideas before the manuscript is published. Reviewers must not be allowed to make copies of the manuscript for their files and must be prohibited from sharing it with others, except with the editor’s permission. Reviewers should return or destroy copies of manuscripts after submitting reviews. Editors should not keep copies of rejected manuscripts. Reviewer comments should not be published or otherwise publicized without permission of the reviewer, author, and editor.

Conflict of Interest in Reviewing Process

Although we are applying double-bind peer review, research sphere can be a small world. It means many reviewers may know the author out of familiarity with their work. You can certainly give a fair assessment of an article that is written by a friend or competitor, but:

  • If there’s a significant conflict of interest, you should reveal this to the editor
  • If the conflict of interest causes a large positive or negative bias, then it is better to decline the review request
  • Avoid personal judgement and criticism at all times; just review the article itself. This is more likely to be well received by the author and lead to better work by them.
  • Every editor will appreciate honesty about conflicts of interest, even if they then have to look for a replacement reviewer.

Please email the Editorial Office at the journal formal email, if you have any concerns about conflict of interest or ethical issues with the paper.

 

The recent reviewers list

 

Reviewer Name Specialty Affiliation
Mohsen Azadbakht Associate Professor of Department of Bio-System Mechanical Engineering, Gorgan University of Agricultural Sciences and Natural Resources, Gorgan, Iran.
Alireza Ashtiani Araghi Precision Agriculture Department of Agrotechnology, Aburaihan College of Agricultural Technology, University of Tehran
Mohammad Hossein Aghkhani Agriculture Mechanization Professor Department of Mechanical Engineering Biosystem Faculty of Agriculture Ferdowsi University Of Mashhad
Afshin Ebrahimi Professor of Electrical Engineering/Sahand University of Technology
Ebrahim Ahmadi Dept of Biosystem Engineering, Bu-Ali Sina University
PARVIZ AHMADI MOGHADDAM Department of Mechanical engineering of bio system
Reza Adiban Agriculture Mechanization Agricultural Engineering Department Ardabil Agricultural and Natural Resources Research and Education Center, AREEO, Ardabil (Moghan), 5695157451, Iran
Ardeshir Asadi Member of scientific staff of Isfahahan Agricultural research center
hormoz asadi Interdisciplinary Topics Associate Professor in agricultural economic researches , Seed and Plant Improvement Institute(SPII), Agricultural Research, Education and Extension Organization (AREEO ), Karaj, Iran
Reza Amiri Chayjan Agriculture Mechanization Department of Biosystems Engineering- Faculty of Agriculture- Bu-Ali Sina University-Hamedan-Iran
Abdoulreza Bagheri Head of Department,،Farabi University
Narges Banaeian Department of Biosystems Engineering, Faculty of Agricultural Sciences, University of Guilan, Rasht, Iran
ahmad banakar Biosystems Mechanical Engineering, Faculty of Agriculture, Tarbiat Modares University, Tehran, Iran
Hosein Behfar Engineering of Biosystems Department, Agricultural Faculty, University of Tabriz, Tabriz, Iran
Razieh Pourdarbani Dept. of Biosystem engineering, University of Mohaghegh Ardabili
Morteza Taki Agriculture Mechanization Department of agricultural machinery and mechanization-Agricultural sciences and natural resources university of Khouzestan
mojtaba jaberimoeaz Department of Biosystems Engineering, Faculty of Agriculture, Bu-Ali Sina University, Hamedan, Iran
Mehrnoosh Jafari Department of Biosystems Engineering, College of agriculture, Isfahan, university of technology
Arman Jalali university of Tabriz
ali hassanpour urmia university
babolah hayati Agriculture Mechanization
mohsen Heidarisoltanabadi Agriculture Mechanization Associated professor/ Agricultural Engineering Research Department,Isfahan Agricultural and Natural Resources Research and Education Center,AREEO, Isfahan, Iran
Jalal Khodaei Department of Biosystem Engineering, Faculty of Agriculture, University of Kurdistan, Sanandaj, Iran
Sina Khalilvandi Behrouzyar PhD Candidate
Mohammad Hadi Khoshtaghaza Biosystems Engineering Department, Agricultural Faculty,, Tarbiat Modares, Tehran, Iran
Saeed Dadashi Interdisciplinary Topics Department of Food Science and Technology, Faculty of Agriculture, University of Tabriz
Ghader Dashti Agriculture Mechanization University of Tabriz
elyas dehghan scientific board member
Jalal Dehghannya University of Tabriz
Hassan Zaki Dizaji Agriculture Mechanization Associate Professor, Biosystems Engineering Department, Agricultural Faculty, Shahid Chamran University of Ahvaz, Ahvaz, Iran.
Hekmat Rabbani Mechanical Engineering of Bio-systems Department, Razi University, Kermanshah, Iran
reza rahimzadeh faculty member of agricultural research, education and extension organization
Zeynab Ramedani Lecturer at Sonqour collage, Razi University, Kermanshah, Iran
Seyed Faramarz Ranjbar
Abbas Rohani Agriculture Mechanization A. Rohani, (Assistant Prof.) Dept of Biosystems Engineering, Faculty of Agriculture, Ferdowsi University of Mashhad (FUM), Mashhad, IRAN
Samira Zareei Department of Biosystems Engineering, Faculty of Agriculture, University of Kurdistan, Sanandaj, Iran
Jaber Soleimani 1Assistant Professor, Agricultural Engineering Research Department, East Azarbaijan Agricultural and Natural Resources Education and Research Center, Agricultural, Research, Education and Extension Organization (AREEO), Tabriz, Iran.
negin sohrabi Department of Biosystem Engineering,, Faculty of Agriculture, University of Tabriz, Tabriz, Iran
S Sadegh Seyedlou University of Tabriz
Mohammad Sharifi Department of Agricultural Machinery Engineering, Faculty of Agricultural Engineering and Technology, College of Agriculture and Natural Resources, University of Tehran, Karaj, Iran.
Ahmad Sharifi Malvajerdi Academic member Agricultural Engineering Research Institute
mahmoud safari 1Department of Agricultural Machinery and Mechanization Research, Agricultural Research Institute of Agricultural Research, Research and Education Organization Agricultural promotion of Karaj, Iran
Mohamad Safvati Department of biosystems eng. university of kurdistan
Adel Taherihajivand Department of Biosystem Engineering, Faculty of Agriculture, University of Tabriz, Tabriz, Iran.
javad tarighi Agriculture Mechanization Associate Professor, Department of Biosystem engineering, University of mohaghegh Ardabili
Saeed zarifneshat Agriculture Mechanization agricultural engineering research department, khorasan razavi agricultural and natural resources research and education center, AREEO, Mashhad, Iran
Yousef Abbaspour-Gilandeh University of Mohaghegh Ardabili
Mahdi Abbasgholipour Department of Mechanical Engineering of Biosystems, Bonab branch, Islamic Azad University, Bonab, Iran.
Shamsollah Abdollah pour University of tabriz,agriculture faculty,faculty member
reza abdi
Yahya Ajabshirchi
Abbas Asakereh Agriculture Mechanization Department of Biosystems, Faculty of Agriculture, Shahid Chamran University of Ahvaz, Ahvaz, Iran
Ezzatollah Askari Asli-Ardeh Standardization of Agricultural Machineries and Mechanization department biosystem engineering, faculty of agriculture and natural resources, university of mohaghegh ardabili mohaghegh
Nahid Aghili Nategh Department of Agricultural Machinery Engineering, Sonqor Agriculture Faculty, Razi University, Kermanshah, Iran
Mohammadreza Alizadeh Member of scientific board/ Rice Research Institute of Iran (RRII)
Rashid Gholami Agriculture Mechanization Department of Agricultural Machinery Engineering, Sonqor Agriculture Faculty, Razi University-Kermanshah- Iran
Mohammad Mohammad Gholami Parashkoohi Department of Mechanical Engineering, Shahr-e-Qods Branch, Islamic Azad University, Tehran, Iran
Rahman Farrokhi Teimourlou Department of Mechanical Engineering of Biosystems, Faculty of agriculture, Urmia University, Urmia, Iran
Hamid Ghasemkhani Agriculture Mechanization, New Energies Department of Mechanical Engineering, National University of Skills (NUS), Tehran, Iran
Hamid Reza Ghassemzadeh Academic Member/ University of Tabriz
Hassan Ghasemi-Mobtaker Agriculture Mechanization Department of Agricultural Machinery Engineering, Faculty of Agriculture, University of Tehran, Karaj, Iran
Jafar Ghezelbash
Heydar Gholizadeh Faculty member of the University of Zanjan
Hadi Karimi Agriculture Mechanization Agricultural Engineering Research Department, Kerman Agricultural and Natural Resources Research and Education Center, Agricultural Research, Education and Extension Organization (AREEO), Kerman, Iran
Masoud Kamali Iran
Armaghan Kosari Moghaddam Agriculture Mechanization Department of Biosystems Engineering, University of Tabriz
amin lotfalian Department of Mechanical Engineering of Biosystem,Faculty of Agricultural Sciences, Shahrekord University, Iran
Davood Mohammadzamani Agriculture Mechanization Department of Biosystems Engineering, Takestan Branch, Islamic Azad University, Ttakestan, Iran
khosro Mohammadi Ghermezgoli Agriculture Mechanization دانشگاه تبریز
Asghar Mahmoudi University of Tabriz
Aref Mardani Department of Mechanical Engineering of Biosystems, Urmia University
Mohammad Reza mostofi sarkari گوهردشت-بلوار انقلاب-فاز 3 بلوک 3- خیابان هشتم غربی پلاک 17 واحد 1
Hassan Masoudi Department of Biosystems Engineering, Faculty of Agriculture, Shahid Chamran University of Ahvaz, Ahvaz,, Iran
T. Mesri Gundoshmian Professor of Biosystems Engineering Dep.
Mostafa Mostafaei Engineering of Biosystems Department, Agricultural Faculty, University of Tabriz, Tabriz, Iran
Mansoureh Mozaffari Researcher of East Azarbaijan Agricultural and Natural Resources Research and Education Center
Ali Maleki Shahrekord University- Mechanical Engineering of Biosystems
Nasim Monjezi Assistant professor, Biosystems engineering Dept., Faculty of Agriculture, Shahid Chamran University of Ahvaz
Hossein Mousazadeh Department of Mechanical Engineering of Biosystems, University of Tehran.
Amirhossein Mirabadi VPST
Ali Mirzazadeh Assist. Prof., Dept. of Agricultural Engineering & Technology, Faculty of Agriculture & Natural Resources (Moghan), University of Mohaghegh Ardabili, Iran.
Esmaeil Mirzaee- Ghaleh Mechanical Engineering of Agricultural Machinery Department, Faculty of Agriculture, Razi University, Kermanshah, Iran
saeid minayie tehran
Gholamhassan Najafi
Hossien Navid Dept. of Biosystems Engineering, Faculty of Agriculture, University of Tabriz, Tabriz, Iran.
Reza Yeganeh Determination of Physical and Mechanical Properties of Agricultural products Associate Professor, Ph.D. Department of Mechanical Engineering of Biosystem , Agricultural Faculty, Ilam University, Ilam, IRAN.
Mohammad Reza Yousefzadeh Taheri Academic staff meber