Modeling and Optimizing Harvested Product Quality and Energy Consumption of Cylindrical Mower in Alfalfa Harvesting

Document Type : Research Paper

Authors

Department of Biosystems Engineering, Faculty of Agriculture, University of Kurdistan, Sanandaj, Iran

Abstract

Abstract
Alfalfa is one of the main forage plants used for animal feed. Four percent of the total cultivated area in Iran is dedicated to this crop. Due to the fact that alfalfa has several harvests during its growth period, mowers have a special role for farmers. The purpose of this study was to evaluate and optimize the performance of cylindrical mower by designing two new blade types, and investigating the effect of blade type, forward speed and blade rotational speed on parameters such as fuel consumption, cutting height, harvest loss and damage index. The modeled blades were designed in Solidworks software environment and the force stresses were analyzed in Ansys software. Data analysis was performed using response surface method and Design Expert 12 software. The results of analysis of variance showed that the forward speed, blade rotational speed and the interaction between forward speed and rotational speed had a significant effect on tractor fuel consumption. But blade length and other mutual effects ofthis factor had no significant effect on tractor fuel consumption. Also, none of the independent parameters had any significant effect on cutting height, harvest loss and damage index. The relationship between independent and dependent variables was modeled in the form of regression equations. The optimal value for forward speed was 15 km/h, for rotational speed was 1596 rpm and for the blade lengh was 6.15 cm.
 

Keywords


Anonymous. (2018). Abstract of the agricultural statistics results. Statistics Center of Iran, Program and Budget Organization. (In Persian)
Arianpour, A., Abdali, A.R., Rashno, M.H., Roozbahani, A., Shekari, Sh. And Ghafari Parvaresh, M. (2018). Production of forage plants. Iran Textbook Publishing Company Press, First edition, 224 pages. (In Persian)
Ball, D. M., Collins, M., Lacefield, G. D., Martin, N.P., Mertens, D.A., Olson, K.E., Putnam, D.H., Undersander, D.J., and Wolf, M.W. (2001). Understanding forage quality. American Farm Bureau Federation Publication, 1(01): 1-15.
Čedík, J., Pražan, R. and Pexa, M., (2017). Effect of rake angle and cutting speed on energy demands of mulcher with vertical axis of rotation. Agronomy Research 15(4), 1530–1539.
Chattopadhyay, P.S., and Pandey, K.P. (1999). Effect of knife and operational parameters on energy requirement in flail forage harvesting. Journal of Agricultural Engineering Research, 73(1): 3-12.
Chowdhury, M.H., and Buchele, W.F. (1976). Development of a numerical damage index for critical evaluation of mechanical damage of corn. Transactions of the ASAE, 19(3):428-432.
Galedar, M.N., Jafari, A., Mohtasebi, S.S., Tabatabaeefar, A., Sharifi, A., O''Dogherty, M.J., Rafiee, S., and Richard, G. (2008). Effects of moisture content and level in the crop on the engineering properties of alfalfa stems. Biosystems Engineering, 101(2):199-208.
Giri, S.K., and Prasad, S. (2007). Drying kinetics and rehydration characteristics of microwave-vacuum and convective hot-air dried mushrooms. Journal of Food Engineering, 78(2): 512-521.
Hosseini Dastjani, S.S., Shamsi, M., and Yusefi, Z. (2012). Determining the cutting quality of forage harvesters using image processing by principal component analysis. 7th National Conference on Agricultural Machinery and Mechanization, 14-16 September, Shiraz University, Shiraz, Iran. (In Persian)
Jafari Naeimi, K. (1996). Construction of a machine for measuring the cutting force in plants and designing a cutting system for the Aterplex harvester. M.Sc. Thesis, Faculty of Agriculture, Tarbiat Modares University. (In Persian)
Kakahy, A. N. N., Ahmad, D., Akhir, M.D., Sulaiman, S., and Ishak, A. (2014a). Effects of rotary mower blade cutting angles on the pulverization of sweet potato vine. Agriculture and Agricultural Science Procedia, 2: 95-101.
Kakahy, A.N., Ahmad, D., Akhir, M.D., Sulaiman, S., and Ishak, A. (2014b). Effects of rotary mower blade cutting angles on the pulverization of sweet potato vine. Agriculture and Agricultural Science Procedia, 2:95-101.
Kakahy, A.N., Ahmad, D., Akhir, M.D., Sulaiman, S., and Ishak, A. (2013). Effects of cutting speeds and moisture content on grass chopping (Pulverizing). Advanced Science Letters, 19(9):2533-2535.
Khazaei, J., Rabani, H., Ebadi, A., and Golbabaei, F. (2002). Determining the shear strength and picking force of pyrethrum flower. AIC 2002 Meeting CSAE/SCGR, Saskatoon, Saskatchewan, July 14 - 17, 2002, 1-11.
Khazaei, J., Rabani, H., and Golbabaei, F. (2003). Determination of shear strength and force of Pirtrum flower. Iranian Journal of Agricultural Sciences, 33(3):433- 444. (In Persian)
Maharlooei, M.M., Loghavi, M., and Nassiri, S.M. (2014). Developing an in-Field Yield Monitoring System and Predicting Some Nutritional Quality Properties of Alfalfa Using Shear and Compressive Energy. Journal of Agricultural Machinery, 4(2): 184-193. (In Persian)
Massomi, A., Hemmat, A., and Shahrian, A. (2010). Design, Construction and Evaluation of a Recompression Machine for Reducing Hay Bale Volume. Iranian Journal of Biosystem Engineering, 40(2): 111-118. (In Persian)
Mohammadi Alasti, B., Sheikhi, A., and Komarizadeh, M.H. (2007). Evaluation of disc mower and analysis of its blades. Third Agricultural Machinery Engineering Student Conference, Shiraz University, Shiraz, Iran. (In Persian)
Momin, M. A., Wempe, P. A., Grift, T. E., and Hansen, A. C. (2017). Effect of four base cutter blade designs on sugarcane stem cut quality. American Society of Agricultural and Biological Engineers, 60(5): 1551-1560.
Stanisavljević, R., Vuković, A., Barać, S., Radojević, R., Đokić, D., and Dragan, P.V. (2019). Influence of harvesting on quality of Alfalfa forage used for haylage and hay. Journal of Agricultural Sciences, 25(3): 384-390.
Tabatabaei Koloor, R., Borghaei, A.M., Alimardani, R., Mobli, H., and Rajabipoor, A. (2005). Investigation of the parameters affected the cutting force and strength of paddy stem. Journal of Agricultural Sciences, 11(2): 261-277. (In Persian)
Tabatabaei, S.A., Shakeri, E., and Alinia, M. (2017). Evaluation of quantitative and qualitative traits of alfalfa cultivars forage in different cuts in yazd region. Journal of Plant Ecophysiology, 9 (29): 146-155. (In Persian)